Product Introduction:
Single girder hook gantry crane is a kind of large lifting capacity, light weight, low cost of the whole machine, small beam frontal area of the whole crane, and high safety. Single girder hook gantry crane is a kind of material handling equipment with a wide range of applications. It is usually used in factories, mines, enterprise production workshops, station logistics sites, ports and wharves and other departments. Single girder hook gantry crane mainly consists of metal structure, trolley, crane operating mechanism, electrical device and so on.
Single girder grab gantry crane is widely used in loading and unloading of bulk cargo in freight yards, bulk material workshops, port terminals and other places. Suitable for factories, mines, buildings, warehouses, etc. It has the characteristics of superior performance, reliable operation, high speed and high efficiency for the operation of grabbing sand, coal ash, sediment and lumps.
MH electric hoist gantry crane is a small and medium-sized simple gantry crane with cantilever. Including electric hoist, cart running mechanism, bridge, outriggers, electrical equipment and other parts. The main beam of the machine is welded by I-beam and steel plate, and the outrigger and lower beam are welded by steel plate. Therefore, it has the advantages of simple structure, light weight, good wind resistance, reliable operation, convenient maintenance and low cost. It is suitable for open-air work places such as station docks, warehouse yards, construction sites, cement product yards, factories, hydropower stations, etc., and is also suitable for indoor workshop work.
3-10 ton electric hoist gantry crane is mainly composed of a mast (main girder, outrigger, lower beam, etc.), a lifting mechanism, an operating mechanism and an electric control part. Used together with CD1 or MD1 electric hoist, it is a light and small lifting equipment that runs on rails. The crane is mostly used in factories, freight yards, wharves, hydropower stations and other open places where the frequency of use is low or the number of times the rated lifting capacity is lifted is small. The crane is forbidden to lift molten metal and flammable and explosive items. According to user requirements, it can also be made into single-end overhanging cantilever or non-cantilever structure.
Features:
1. Optimized design of single girder gantry crane, compact overall structure.
2. With the gate-shaped frame structure, the cart can walk on the pre-paved track on the ground. It has the advantages of large operation range, wide adaptability, high site utilization rate and strong versatility.
3. The single-girder gantry crane adopts flexible outriggers to make the gantry small and exquisite, saving space.
4. It is suitable for lifting the rated load below 20t.
5. The gantry bracket is used to effectively release the stress and prolong the structural life.
6. Single-girder gantry crane frequency conversion control, stable operation.
7. Standardized and unified configuration, so that the stability of the whole machine is higher.
Technical Parameters:
|
Product Name
|
Single Beam Gantry Crane
|
|
Lifting Height (m)
|
6,9,12,18,24,30
|
|
Electric Hoist Model
|
MD1 Model
|
HC Model
|
CD1 Model
|
|
Lifting Speed (m/min)
|
8/0.8 (7/0.7)
|
3.5 (3.5/0.35)
|
8 (7)
|
|
Traveling Speed (m/min)
|
20/30
|
|
Motor
|
Cone Squirrel-cage Model
|
|
Working Class
|
Internediate
|
|
Electric Current
|
380V 50Hz Three-phase
|
|
Width of Trail
|
37-70
|
|
Wheel Diameter
|
ø270
|
FAQ:
Q&A
- Q: What payment mothods do you support?
A: T/T, L/C, Western Union, MoneyGram, D/A, D/P.
- Q: What is the model number of the Gantry Crane?
A: The model number of the Gantry Crane is L Type, MH Model, MG Model.
- Q: What is your standard trade terms?
A: EXW, FOB, FCA, CIF, CFR, DAP, DDP
- Q: What certifications does the Gantry Crane have?
A: The Gantry Crane has CE/SGS/BV certifications.
- Q: How long is your warranty time?
A: The warranty time is one year time.
Your message must be between 20-3,000 characters!
